Manufacturer / responsible person
Axel Gnann
Freiburgerstr. 9/1, 79312 Emmendingen, GermanyFor product safety questions and GPSR-related notices, please contact:
Product information "Bushing 19 to 9 mm"
This holder bushing reduces the lower 19 mm bore of a press to 9 mm. This makes tools with a 9 mm holder fit in a press with a 19 mm lower bore. This bushing is primarily intended for button tools for covering buttons with fabric .
The individual item is useful as a spare part when an existing bushing has been lost. This bushing is not suitable for the 12 mm tool family. This applies in particular to eyelet, snap, hollow rivet and hole punch tools.
Login
No reviews found. Share your insights with others.
Which presses is this bushing intended for?
The bushing is intended for presses with a 19 mm lower bore.
Which tools is this bushing intended for?
The bushing is intended for tools with a 9 mm base, in particular button tools for covering buttons with fabric.
Is this bushing suitable for eyelet, snap, hollow rivet or hole punch tools?
No. These tools belong to the 12 mm tool family and require a 19-to-12 mm bushing.
When is it useful to buy this bushing individually?
Individual purchase is useful when an existing bushing has been lost and you need a replacement.
Can I continue to use existing 9 mm tools with this bushing?
Yes. If your press has 19 mm at the bottom and the tool base measures 9 mm at the bottom, you can continue to use the existing 9 mm tool.
How do I know whether I need the 9 mm instead of the 12 mm bushing?
The 9 mm bushing fits tools with 9 mm lower diameter. For eyelet, snap, hollow rivet and hole punch tools you need the 12 mm bushing.
Use of the bushing
- The bushing serves as a reduction from 19 mm to 9 mm in the lower holder of a suitable press.
- It is intended for button tools for covering buttons with fabric.
- It can generally be used for 9 mm tools when the lower tool part has a 9 mm diameter.
Installation of the bushing
- You swap the bushings by loosening the side clamp screw of your press and making the change. Tighten the screw hand-tight only after installation.
Requirements for use
- The press needs a 19 mm bore at the bottom.
- The tool to be used needs a 9 mm holder at the bottom.
- The bushing does not replace another holder size and only changes the lower tool holder.
Important limit
- The bushing is not suitable for the 12 mm tool family.
- Eyelet, snap, hollow rivet and hole punch tools require a 19-to-12 mm bushing for that.
With Getmore Crafts products
- Compatible with presses that have a 19 mm bore at the bottom.
- Compatible with button tools and other 9 mm tools whose lower tool part has a 9 mm diameter.
- Not compatible with eyelet, snap, hollow rivet and hole punch tools of the 12 mm tool family.
With products from other manufacturers
- No approved compatibility statement is available for products from other manufacturers.
Your package contains:
- 1x holder bushing
Technical details
| Material | Steel |
| Height | 24.2 mm |
| Overall diameter | 19 mm |
| Holder diameter | 9 mm |