Manufacturer / responsible person
Axel Gnann
Freiburgerstr. 9/1, 79312 Emmendingen, GermanyFor product safety questions and GPSR-related notices, please contact:
Passende Produkte
Product information "Eyelets to DIN 7332 Brass, Stainless Steel, Steel"
These self-tapping round eyelets to DIN 7332 are designed for durable fastenings where a clean fit and high tensile strength matter. They are suitable for applications such as banners, tarpaulins and other projects with high pull loads.
All variants are processed with a matching DIN eyelet tool in the same size and are intended only for spring-strike press or toggle press. You can choose between sizes 10 mm, 12 mm, 14 mm and 16 mm as well as stainless steel, brass and steel materials.
Login
5 reviews
8 January 2026 15:34
Top Qualität und zuverlässiger Service!
Ich habe schon öfter bei Getmor eingekauft und bin jedes Mal sehr zufrieden. Die Produkte sind durchweg von sehr guter Qualität. Gerade habe ich wieder Ösen bestellt – auch diesmal alles einwandfreie Ware. Ich kann Getmor absolut weiterempfehlen. Man fühlt sich als Kunde hier sehr gut aufgehoben, und die hochwertige Ware spiegelt sich deutlich in meinen eigenen Produkten wider.
4 June 2024 10:47
Very good Quaity
This product is fantastic and is the best I have found on the internet.
Shipping is fast and the seller is very serious and answers all my questions.
12 December 2023 06:04
Ein sehr gutes Produkt
Wir verwenden die Ösen für Abdeckplanen und soweit gibt es keine Probleme damit.
28 December 2021 10:53
Gute Qualität
Öse hält sehr gut in Textilien
28 December 2020 16:24
Klasse
Ich bin sowas von begeistert. Kein Vorstanzen mehr. In einem Arbeitsgang wird die Öse eingebracht und gleichzeitig das Ösenloch ausgestanzt. Hält bombenfest. Im Alltagsgebrauch keine ausgerissenen Ösen mehr.
Do I need a pre-punched hole for these DIN eyelets?
No. All variants are self-tapping. If you still wish to pre-punch, the hole should match the inner diameter of the chosen eyelet.
Which presses can I use to process these DIN eyelets?
Only spring-strike press and toggle press are intended. TEP-2 and screw press are too weak for these sturdy DIN eyelets.
Which tool do I need for processing?
You always need a matching DIN eyelet tool in the same size as the chosen eyelet.
How do these DIN eyelets differ from standard eyelets?
DIN eyelets are significantly sturdier, self-tapping and designed for higher pull loads. They are also not intended for TEP-2 or screw press.
What is special about the 16 mm variant?
At 16 mm the washer has serrations. This helps prevent the eyelet from slipping during pressing.
What is included in the delivery?
You always receive the chosen quantity of eyelets and the same number of matching washers.
Available sizes
- The DIN eyelets are available in 10 mm, 12 mm, 14 mm and 16 mm inner diameter.
- The tool size must always exactly match the chosen eyelet size.
Material
-
You can choose between stainless steel, brass and steel.
- Stainless steel and brass are rust-free.
- Surfaces differ by material: stainless steel untreated, brass nickel-plated, steel zinc-plated.
Special feature of the 16 mm variant
- At 16 mm the washer has serrations.
- This helps prevent the eyelet from slipping during pressing.
Typical applications
- The eyelets are intended for applications where high pull loads must be safely absorbed.
- Typical examples are banners, tarpaulins and comparable materials with stressed eyeleting.
Assembly
- All variants are self-tapping and generally do not require pre-punching.
- If you still wish to pre-punch, orient the hole to the inner diameter of the chosen eyelet.
Important requirement
- Processing always requires a matching DIN eyelet tool in the same size as the eyelet.
- Only with a sufficiently powerful press is a clean, secure finish achieved.
With Getmore Crafts products
- Suitable for processing with spring-strike press and toggle press .
- A matching DIN eyelet tool in the same size as the chosen eyelet is always required.
- Not intended for TEP-2 and screw press, as these presses are too weak for these sturdy DIN eyelets.
With products from other manufacturers
- A matching DIN eyelet tool in the same size and a press with sufficient force for DIN eyelets are decisive.
- There is no guarantee that tools from other manufacturers will work cleanly with these eyelets.
Your package contains:
- The quantity of DIN eyelets you selected.
- The same number of matching washers.
- Example: For an order quantity of 50 you receive 50 eyelets and 50 washers.
Technical details
General information
| Product type | Eyelets to DIN 7332 including washers |
| Standard (DIN) | DIN 7332 |
| Version | self-tapping round eyelets |
| Pre-punching required | no |
| Hole diameter | optional, matching the actual inner diameter of the eyelet |
| Load level | high |
| Delivery form | 1 eyelet + 1 washer per piece |
| Sales unit | free quantity selection |
Material variants compared
| Material | Surface treatment |
|---|---|
| Brass | nickel-plated |
| Stainless steel | untreated |
| Steel | zinc-plated |
Dimension table
| Size | Material | Outer diameter | Actual inner diameter | Barrel length | Special feature |
|---|---|---|---|---|---|
| 10 mm | Stainless steel | 20 mm | 10,3 mm | 6,3 mm | - |
| 12 mm | Stainless steel | 24 mm | 12,3 mm | 6,5 mm | - |
| 14 mm | Stainless steel | 27 mm | 13,7 mm | 7 mm | - |
| 16 mm | Stainless steel | 30 mm | 17 mm | 7 mm | washer with serrations |
| 10 mm | Brass | 20 mm | 10,3 mm | 5,7 mm | - |
| 12 mm | Brass | 24 mm | 12,3 mm | 6,5 mm | - |
| 14 mm | Brass | 27 mm | 13,7 mm | 7 mm | - |
| 16 mm | Brass | 30 mm | 17 mm | 7 mm | washer with serrations |
| 10 mm | Zinc-plated steel | 20 mm | 10,3 mm | 5,4 mm | - |
| 12 mm | Zinc-plated steel | 24 mm | 12,3 mm | 6,5 mm | - |
| 14 mm | Zinc-plated steel | 27 mm | 13,7 mm | 7 mm | - |
| 16 mm | Zinc-plated steel | 30 mm | 17 mm | 7 mm | washer with serrations |