Manufacturer / responsible person
Axel Gnann
Freiburgerstr. 9/1, 79312 Emmendingen, GermanyFor product safety questions and GPSR-related notices, please contact:
Passende Produkte
Product information "Eyelet Tool Standard Eyelets - Thread: M6, M8"
This eyelet tool is designed for standard eyelets in the chosen size. The tool size follows the inner diameter of the eyelet, so you match tool and eyelet using the same millimeter size.
Depending on the variant, the upper tool part is made with M6 or M8, while the lower tool part is designed for the 12 mm bushing . The two-part tool sets the eyelet and washer in one press stroke and requires a suitable press for this.
Login
No reviews found. Share your insights with others.
Which size do I need for my eyelet tool?
The tool size must always match the inner diameter of the standard eyelet. For a 5 mm eyelet, you therefore choose a 5 mm tool.
Do I need to pre-punch the material?
Yes. Standard eyelets are inserted into pre-punched material with this tool.
Does this eyelet tool fit my press?
This listing is designed for presses with M6 or M8 upper thread and a 12 mm bushing at the bottom.
Can I also process DIN 7332 eyelets with this tool?
No. This tool is designed for standard eyelets. For DIN 7332 eyelets you need the matching DIN tool.
What is the difference to the 1/4"-20 UNC version?
The function is the same, but the upper thread is different. This variant is intended for M6 or M8 presses, while separate tool variants are provided for 1/4"-20 UNC.
Are the upper and lower parts included in the delivery?
Yes. You receive a two-part eyelet tool with an upper and a lower tool part in the chosen variant.
Why should the eyelet and washer be set in one press stroke?
The eyelet hardens after deformation. That is why the eyelet and washer should be positioned cleanly and set in a single press stroke.
Available sizes
- 3 mm
- 4 mm
- 5 mm
- 6 mm
- 7 mm
- 10 mm
- 12 mm
- 17 mm
Thread options
- M6
- M8
Selection guide
- The tool size always corresponds to the inner diameter of the standard eyelet.
- Therefore choose the same millimeter size as the eyelet you want to set.
- Choose the thread to match your existing press.
Application steps
- Punch the material to match the chosen eyelet size.
- Screw the upper tool part fully into the suitable press and insert the lower tool part into the 12 mm bushing .
- Insert the eyelet, place the material with the pre-punched hole on top, and position the washer cleanly.
- Set the eyelet and washer in one press stroke.
Notes on use
- Check the upper tool part regularly for a firm fit and retighten it if necessary.
- On the spring impact press , the upper tool part should be firmly tightened with suitable pliers.
- The tool is suitable for textiles, leather and similar materials, provided the material is punched correctly beforehand.
With Getmore Crafts products
- Suitable for Getmore Crafts standard eyelets in the matching size.
- The tool size must always match the inner diameter of the eyelet.
- For pre-punching, a Getmore Crafts hole tool in the same millimeter size can be combined effectively.
- This M6/M8 listing is not intended for Getmore Crafts presses with 1/4\"-20 UNC upper thread.
With products from other manufacturers
- Usable with presses that have, depending on the chosen variant, an M6 or M8 upper thread.
- A matching 12 mm bushing is required at the bottom.
- This standard eyelet tool is not the right choice for DIN 7332 eyelets .
Technical details
| Material | Alloy steel |
| Surface treatment | Nickel-plated |
| Thread upper tool part | M6 or M8 |
| Diameter lower tool part | 12 mm |
| Suitable eyelet type | Standard eyelets, not DIN 7332 |
| Available sizes | 3 mm; 4 mm; 5 mm; 6 mm; 7 mm; 10 mm; 12 mm; 17 mm |
| Tool construction | 2-part |
| Required lower socket | 12 mm bushing |