Manufacturer / responsible person
Axel Gnann
Freiburgerstr. 9/1, 79312 Emmendingen, GermanyFor product safety questions and GPSR-related notices, please contact:
Product information "Universal setting punch set for snap fasteners"
This set pairs the universal setting punch (1/4"-20 UNC) with a snap die for Jersey, S-spring or ring-spring snaps — or the punch alone.
Size is cap diameter and die size: Jersey 8 / 9.5 / 10.5 / 15 / 17 mm; S-spring 10 / 12.5 / 15 mm; ring-spring 12.5 / 15 mm. Ring-spring: high hold. S-spring: medium, smooth open. Jersey: stretch fabrics, no pre-punch.
Snaps and hole punch are not included. Ring-spring and S-spring need a 2.5 mm hole; Jersey prongs bite themselves. Strike both snap pairs in turn.
Login
No reviews found. Share your insights with others.
What is included?
Always the universal setting punch. With type and size, the matching snap die. Snaps, hole punch and hammer are not included.
Jersey, S-spring or ring-spring?
Jersey for stretch fabrics, no hole. S-spring medium hold with 2.5 mm hole. Ring-spring high hold with 2.5 mm hole.
Does Jersey need a hole punch?
No.
What is size?
Cap diameter = die size.
Type
- Jersey, S-spring, ring-spring, or without tool.
Size
- Jersey: 8, 9.5, 10.5, 15, 17 mm
- S-spring: 10, 12.5, 15 mm
- Ring-spring: 12.5, 15 mm
Which type?
- Jersey: knit, sweat, babywear; prongs pierce the fabric.
- S-spring: clothing, bags; pre-punch 2.5 mm.
- Ring-spring: straps, outdoor, workwear; pre-punch 2.5 mm.
Workflow
- Screw the upper die into 1/4"-20 UNC; seat the lower die.
- Pre-punch 2.5 mm for S-spring/ring-spring; skip for Jersey.
- Load one snap part below, fabric, mate above; strike controlled.
- Repeat for the second pair — a full snap needs two hits.
With Getmore Crafts products
- Only the chosen type and cap size. Do not swap dies across systems.
- 1/4"-20 UNC later on Getmore presses.
- S-spring/ring-spring: 2.5 mm hole punch sold separately. Jersey without a hole.
Other brands
- No binding approval for third-party snaps. M6/M8 foreign presses need other dies.
Your package contains
- 1 universal setting punch 1/4"-20 UNC
- With type and size: 1 snap die
- Without tool: no snap die
Not included
- Snap fasteners
- 2.5 mm hole punch (needed for S-spring and ring-spring)
- Hammer
Technical details
| Device | Universal setting punch, hammer use |
| Punch material | polished steel |
| Height / diameter | approx. 12 cm / approx. 1 cm |
| Punch weight | approx. 0.037 kg |
| Upper thread | 1/4"-20 UNC |
| Types | Jersey, S-spring, ring-spring |
| Sizes | Jersey 8–17 mm; S-spring 10 / 12.5 / 15 mm; ring-spring 12.5 / 15 mm |
| Pre-punch | S-spring and ring-spring: yes, 2.5 mm; Jersey: no |
| Country of origin | TR |