Manufacturer / responsible person
Axel Gnann
Freiburgerstr. 9/1, 79312 Emmendingen, GermanyFor product safety questions and GPSR-related notices, please contact:
Product information "Universal setting punch set for hollow rivets"
This set pairs the universal setting punch (1/4"-20 UNC) with a matching hollow-rivet die for double-cap or single-cap hollow rivets — or the punch alone.
Double-cap: decorative heads both sides, dies 6 / 7 / 9 / 12 mm. Single-cap: one show face, reverse functional, dies 5 / 6 / 7 / 9 / 12 / 13 mm. Size is cap diameter.
Rivets and hole punch are not included. Pre-punch 2.5 mm. Rivets in steel or brass, typically silver, gold, antique, black — sold separately.
Login
No reviews found. Share your insights with others.
What is included?
Always the universal setting punch. With type and size, the hollow-rivet die. Rivets, hole punch and hammer are not included.
Double-cap or single-cap?
Double-cap: decorative head both sides. Single-cap: one show face. The die must match.
Which hole?
2.5 mm. Shank measures are on the rivet variant.
Brass or steel?
Steel for higher mechanical load. Brass softer, rust-free, good for leather and textile.
Type
- Double-cap: 6, 7, 9, 12 mm
- Single-cap: 5, 6, 7, 9, 12, 13 mm
Rivets (sold separately)
- Steel (higher strength) or brass (rust-free). Colours silver, gold, antique, black per listing.
Typical uses
- Bags, belts, backpacks, clothing, small leather, jewellery.
- Double-cap if both sides show; single-cap if the reverse should stay quiet.
Preparation
- Pre-punch 2.5 mm. Check rivet shank length vs material thickness.
Workflow
- Upper die into 1/4"-20 UNC; lower die in the base.
- Align rivet and material.
- Strike the punch in a controlled way.
With Getmore Crafts products
- Die must match head form and cap size of the hollow rivets.
- Pre-punch 2.5 mm with a hole punch (not in the set).
- 1/4"-20 UNC later on Getmore presses.
Other brands
- Third-party rivets only if dimensions match. No function guarantee for foreign tools.
Your package contains
- 1 universal setting punch 1/4"-20 UNC
- With type and size: 1 hollow-rivet die
- Without tool: no rivet die
Not included
- Hollow rivets
- 2.5 mm hole punch
- Hammer
Technical details
| Device | Universal setting punch, hammer use |
| Punch material | polished steel |
| Height / diameter | approx. 12 cm / approx. 1 cm |
| Punch weight | approx. 0.037 kg |
| Upper thread | 1/4"-20 UNC |
| Types | double-cap, single-cap |
| Die sizes | double-cap 6 / 7 / 9 / 12 mm; single-cap 5 / 6 / 7 / 9 / 12 / 13 mm |
| Pre-punch | yes, 2.5 mm |
| Country of origin | TR |