Manufacturer / responsible person
Axel Gnann
Freiburgerstr. 9/1, 79312 Emmendingen, GermanyFor product safety questions and GPSR-related notices, please contact:
Product information "Circle Cutter"
The circle cutter is the cutting tool for round blanks in the press. It punches clean circles in the selected size and is designed for repeatable work with fabric, leather, tarpaulins, banner material and similar flexible flat materials.
For use, the cutter is always used together with the matching holder for circle cutter and the base pad for circle cutter. Only this three-part system is ready for operation and ensures clean guidance during punching.
The cutting edge is made of hardened tool steel. The cutter is very sharp and a wear part: it becomes dull over time and is replaced completely when needed, as no replaceable blade is provided.
Login
No reviews found. Share your insights with others.
What else do I need besides the circle cutter?
You also need the matching holder for circle cutter and the base pad for circle cutter. Only these three parts together form a ready-to-use system.
Which presses is the circle cutter suitable for?
With the TEP-2 variant of the holder, use is possible in the TEP-2 eyeletting press and the toggle press. With the FSP variant of the holder, use is possible in the spring-strike press. The screw press is not recommended for circle cutter use.
Which materials can I punch with the circle cutter?
Suitable materials include fabrics, leather, tarpaulins, banners and comparable flexible flat materials.
Which sizes are available?
The circle cutter is available in the variants 18 / 20 mm, 20 / 22 mm, 22 / 24 mm, 24 / 26 mm, 26 / 28 mm, 28 / 30 mm, 30 / 32 mm, 32 / 34 mm, 34 / 36 mm, 36 / 38 mm, 40 / 42 mm, 42 / 44 mm, 44 / 46 mm and 50 / 52 mm.
Does the circle cutter have a replaceable blade?
No. There is no replaceable blade. When worn, the complete cutter is replaced.
Can I use the circle cutter with presses from other manufacturers?
Yes, provided the holder for circle cutter and the base pad for circle cutter fit mechanically into the respective press. No specific approval for individual third-party systems is available.
Is the circle cutter sharp?
Yes. The circle cutter is very sharp. Take care to avoid cuts when inserting and handling it, and do not reach into the cutting edge.
Size
The circle cutter is available in several sizes. Each variant is designated as a pair of line size and mm measurement.
- 18 / 20 mm: For 20 mm circle diameter.
- 20 / 22 mm: For 22 mm circle diameter.
- 22 / 24 mm: For 24 mm circle diameter.
- 24 / 26 mm: For 26 mm circle diameter.
- 26 / 28 mm: For 28 mm circle diameter.
- 28 / 30 mm: For 30 mm circle diameter.
- 30 / 32 mm: For 32 mm circle diameter.
- 32 / 34 mm: For 34 mm circle diameter.
- 34 / 36 mm: For 36 mm circle diameter.
- 36 / 38 mm: For 38 mm circle diameter.
- 40 / 42 mm: For 42 mm circle diameter.
- 42 / 44 mm: For 44 mm circle diameter.
- 44 / 46 mm: For 46 mm circle diameter.
- 50 / 52 mm: For 52 mm circle diameter.
Choose the variant to match the desired diameter of the finished circle blank.
Purpose
The circle cutter is intended for round blanks in the press. It is suitable for fabrics, leather, tarpaulins, banners and comparable flexible flat materials.
Application
- Unscrew the pre-mounted holder with internal thread and external hex, then screw the matching holder for circle cutter into the top of the press.
- Remove the holder bushing from the press and insert the base pad for circle cutter.
- Insert the circle cutter in the selected size into the holder, align it, and secure it with the set screw on the side of the cutter holder.
- Loosen the large set screw on the back of the press head (body) and move the press head upward.
- Important: The gap between the cutter and the base pad for circle cutter must be 28 mm so that the spring strike can trigger.
- Position the material between the cutter and the base pad and carry out the pressing operation.
Important notes
- Without a matching holder and base pad, the circle cutter cannot be used.
- The cutter is very sharp. Take care of your fingers when inserting and handling it, and do not reach into the cutting edge.
- The cutter is a wear part and becomes dull over time.
With Getmore Crafts products
- Holder for circle cutter: The cutter is always used with the matching holder for circle cutter.
- Base pad for circle cutter: The base pad is always required as the counterpiece during punching.
- Presses: With the TEP-2 variant of the holder, use is possible in the TEP-2 eyeletting press and toggle press. With the spring-strike press variant of the holder, use is possible in the spring-strike press.
- Screw press: Not recommended for circle cutter, as the spindle mechanism does not allow a clean punching result.
With products from other manufacturers
- Use may also be possible with presses from other manufacturers, provided the holder for circle cutter and the base pad for circle cutter fit mechanically into the respective press. We do not guarantee function with products from other manufacturers.
Your package contains:
- 1 x circle cutter in the selected size
Not included:
Technical details
| Product class | Tool |
| Cutting edge material | Hardened tool steel |
| Variants | 18 / 20 mm; 20 / 22 mm; 22 / 24 mm; 24 / 26 mm; 26 / 28 mm; 28 / 30 mm; 30 / 32 mm; 32 / 34 mm; 34 / 36 mm; 36 / 38 mm; 40 / 42 mm; 42 / 44 mm; 44 / 46 mm; 50 / 52 mm |
| Suitable materials | Fabrics; leather; tarpaulins; banners; similar flexible flat materials |
| Replaceable blade | no |
| Wear part | yes |
| Required accessories | Holder for circle cutter; Base pad for circle cutter |