Manufacturer / responsible person
Axel Gnann
Freiburgerstr. 9/1, 79312 Emmendingen, GermanyFor product safety questions and GPSR-related notices, please contact:
Eyeletting Tool Standard Eyelets - Thread: 1/4" - 20 UNC
Product number:
1050984321
Product information "Eyeletting Tool Standard Eyelets - Thread: 1/4" - 20 UNC"
This eyeletting tool is designed for setting standard eyelets in the selected size. The tool size and the inner diameter of the eyelet always go together, which makes selection clear and straightforward.
The upper tool part has a 1/4\"-20 UNC thread and therefore fits all Getmore Crafts presses. The two-part tool is inserted into the press and sets the eyelet and backup washer in a single operation.
Login
1 - 10 of 15 reviews
24 April 2026 03:38
sehr gut
wie immer super Qualitaet
23 December 2025 08:17
sehr gut
sehr gut
21 September 2025 20:18
Ösen endlich entspannt anbringen
Sehr schnell erhalten und gleich getestet. Funktioniert hervorragend. Endlich kann ich sicher sein, dass die Ösen sauber im Stoff anzubringen sind. Auch für mich. Ich brauche nicht mehr extra in den Keller gehen, um die Nachbarn beim Ösen einschlagen nicht unnötig zu belästigen. Ich bin sehr zufrieden.
3 February 2025 18:50
impéccable pour poser des oeillets de...
très facile à poser avec ma presse getmore
8 December 2024 02:24
sehr gute Qualitaet
sehr gute Qualitaet
17 July 2024 18:51
SUPER, passt hervorragend
Das Päckchen mit den dazu passenden Ösen war wie gewohnt turboschnell bei mir in Österreich!
19 May 2023 08:16
Bueno
Bien
30 October 2022 05:42
Ösenwerkzeug
Bin begeistert von dem Ösenwerkzeug. Kann meine Ösen immer sehr präzise anbringen. Kein Verrutschen, oder so. Auf Grund meiner Unkenntnis hätte ich am Anfang mal Ösen und Werkzeug in nicht der richtig zueinander passenden Größe bestellt. Lobenswerter Weise würde ich telefonisch kontaktiert und sehr gut bersten. Ich bin begeistert vom Geschäftsgebahren der Firma. Vielen Dank dafür.
29 April 2022 20:08
Super
Nach der superschnellen Lieferung gleich ausprobiert und perfektes Ergebnis.
13 April 2022 10:18
Blitz-Versand + Top Ware + Besten Dank!
Blitz-Versand + Top Ware + Besten Dank!
What size do I need for my eyeletting tool?
The tool size must always match the inner diameter of the standard eyelet. For a 5 mm eyelet, choose a 5 mm tool.
Do I need to pre-punch the material?
Yes. With this standard eyelet tool, the material is pre-punched before the eyelet and backup washer are set.
Does this eyeletting tool fit my Getmore Crafts press?
Yes. The upper tool part has a 1/4"-20 UNC thread, and the lower tool part is designed for the 12 mm holder. This makes the tool compatible with all Getmore Crafts presses.
Can I prepare the pilot hole in the same mm size as the eyelet?
Yes. The pilot hole can be prepared in the same mm size as the inner diameter of the eyelet.
Are the upper and lower parts included in the delivery?
Yes. You receive a two-part eyeletting tool with upper and lower tool parts in the selected size.
What is the difference from the M6 or M8 variant?
The function is the same, but the thread on the upper tool part is different. This listing is for 1/4"-20 UNC, while separate tool variants are available for M6 or M8.
Can I also process DIN eyelets with this tool?
No. This tool is designed for standard eyelets. For DIN eyelets you need the matching DIN eyeletting tool.
Available sizes
- 3 mm
- 4 mm
- 5 mm
- 6 mm
- 7 mm
- 10 mm
- 12 mm
- 17 mm
Size logic
- The tool size always corresponds to the inner diameter of the standard eyelet.
- Therefore choose the same millimetre size as the eyelet you want to set.
- The pilot hole can be prepared in the same mm size as the eyelet inner diameter.
Application steps
- Pre-punch the material to match the selected eyelet size.
- Screw the upper tool part fully into the press and insert the lower tool part into the 12 mm holder.
- Insert the eyelet and place the material with the prepared hole onto the eyelet.
- Place the backup washer on top and align the parts neatly.
- Set the eyelet and backup washer in a single pressing operation.
Usage notes
- Check the upper tool part regularly for a secure fit and retighten the thread if needed.
- In the spring-strike press, the upper tool part should be tightened firmly with a suitable pair of pliers.
- The tool is designed for use in a press.
With Getmore Crafts products
- Compatible with all Getmore Crafts presses, i.e. presses with 1/4\"-20 UNC upper thread and 12 mm holder at the bottom.
- Suitable for standard eyelets in the matching size.
- The tool size must match the inner diameter of the eyelet.
- The pilot hole can be prepared in the same mm size as the eyelet inner diameter.
With products from other manufacturers
- Usable only with presses that have 1/4\"-20 UNC upper thread and a matching 12 mm holder at the bottom.
- This listing is not suitable for presses with M6 or M8 thread. Separate tool variants are available for those.
- This standard eyeletting tool is not the right choice for DIN eyelets.
Your package contains:
- 1 upper tool part in the selected size
- 1 lower tool part in the selected size
Not included:
Technical details
| Material | Alloy steel |
| Surface treatment | Nickel plated |
| Thread upper tool part | 1/4\" - 20 UNC |
| Diameter lower tool part | 12 mm |
| Tool construction | 2-part |
| Suitable eyelet type | Standard eyelets |
| Available sizes | 3 mm; 4 mm; 5 mm; 6 mm; 7 mm; 10 mm; 12 mm; 17 mm |